Varieties of vinyl floor

Vinyl flooring comes in two main types based on how it is laid:

Adhesive tiles: products have a thickness of 2-3 mm and are glued to the base using a special contact adhesive for PVC. It is important to know that gluing is carried out only on a pre-prepared floor surface. The cost of a square meter of adhesive quartz vinyl is cheaper than that of a lock vinyl, but it is necessary to take into account the need to purchase glue and the cost of leveling the base.

Flooring

Castle tiles : Lamellas from 3.5 mm thick with strong click or 5g locks. Installation of best vinyl plank flooring in Pittsburgh, PA is carried out without the help of glue, like a designer, each next plate is fastened to the previous one in a lock. For laying on a screed, a substrate is not necessary, however, specialized substrates for PVC coatings can be used they are characterized by increased rigidity compared to standard ones. Some manufacturers allow vinyl flooring to be laid on a 2mm thick cork underlay.

Adhesive floors are more maintainable: in case of damage, the deformed plate is cut out, and a new one is glued in its place. If we talk about the restoration of castle quartz vinyl, the master needs to shift the entire area to the problem area.

The choice in favor of the castle option is made by buyers due to the ease of installation and a wide palette of colors. In addition, such lamellas are thicker, and it is more convenient to combine them with other types of coatings: tiles, laminate, etc., whose thickness is from 8 mm.

Flaws

Despite the large number of advantages of vinyl flooring, there are also disadvantages:

Sometimes it is problematic to get in line with other coatings, since the average thickness of vinyl is 4.5 mm.

Rather high price when compared with laminate;

For laying on an infrared warm floor, only certain types of substrate can be used: rigid and with a foil layer. In this case, the vinyl itself must be castle, with a thickness of at least 4 mm.